Frequently asked questions

Ordinary plastic wood flooring is the first generation of plastic wood flooring, while online embossed flooring is an upgraded product of the first generation. Co extruded plastic wood flooring belongs to the second generation of plastic wood flooring, which is more durable than ordinary plastic wood and has better parameters in all aspects. Dual color co extruded flooring, with different decors pressed from top to bottom.

of course. Our product does not absorb water, which makes it an ideal choice for waterfront locations. Moreover, since salt has no effect on our boards, our products can be used by the sea. In addition, our board surface has no burrs, which can effectively protect both feet.

Like most flooring products, our flooring may lose some slip resistance when it gets wet, but it can still meet the minimum slip resistance requirements set by HSE. To ensure better anti slip performance of the product, it is crucial to maintain the cleanliness of the board.

meeting. Almost everything will fade when exposed to sunlight and other weather conditions for a long time. Our product has added high-quality UV resistant toner and uses hardwood fibers (cork fibers are more prone to fading than hardwood fibers) to reduce the risk of fading. However, for things with textured appearance, visible fading can still occur after several months (the fading process and degree depend on actual weather conditions). Just like other products made from wood, fading can occur but the plastic contained will maintain its color. Any original color difference is caused by the natural color difference of wood fibers, and once affected by weather conditions, these boards will produce similar tones.

No. Please do not use any glue to fix the board or fill the gaps between the boards. This approach will damage the drainage and natural expansion properties of the board.

For regular cleaning, you only need to use water for cleaning, and if necessary, warm soapy water can be used. If performing deep cleaning, the most effective method is to use a sponge or soft brush dipped in water, or have professionals use a high-pressure water gun with a water pressure not exceeding 1500 psi for cleaning.

If there are scratches or damage on the board, tung oil or resin synthetic oil can be used to alleviate the scratches.

No. Our product is a low maintenance product rather than a maintenance free product. You do not need to polish, oil, paint, or spray insect repellent on it, but it may require regular cleaning and maintenance.